Trass Powder
Trass (volcanic ash), is an excellent bonding agent in combination with lime putty. Both mortars and plasters benefit from the addition of trass, making them stronger and more resistant to the weathering. Trass is a natural mineral construction material and is recommended by construction biologists.
Composition:
Trass, according to ÖNORM B3323
Applicability:
Trass is suitable as a lime mortar aggregate for walls and plastering. Lime putty to ratio of 1 part lime putty to 0.1 – 0.25 parts of trass (10-20%). The addition of sand is possible, depending on the application and the type of sand being used.
Processin:
- Dullinger trass is an excellent bonding agent in combined with lime putty.
- “Al fresco” (wet on wet) processing is recommended.
- Do not use if air and surface temperature are below 5° C.
Available in the following containers:
Product specific data is available on request.
For a listing of all suitable surfaces and processing guidelines please refer to our product overview.
Related Links:
Safety Guidelines:
- Limestone products are corrosive.
- Wear safety goggles and gloves during application.
- Immediately remove unwanted splashes or strokes with water.
- Immediately rinse with water in the case of skin or eye contact.
- Seek medical aid in case of eye contact.
- Keep out of the reach of children.
- Surfaces that are not be processed, should be covered up or protected by taking the appropriate measures.
The above information was provided by us for the latest updates on our research and experience. Because of processing methods, environmental influences, and the different nature of the surfaces,
a general obligation of the legal validity of our recommendations must be excluded. Previous to the use of our products, the user must check the suitability of the product (sample surface and/or sample paint). When new products or new editions of product descriptions appear, all previous descriptions (texts) loose their validity.
|